|
 |
|
|
CEMIX AMU is formulated with Portland cement and Polymers. Easy to use: simply mix with water and use it for setting porcelain tile, vitreous or semi vitreous ceramic tiles, quarry tiles, pavers, glass mosaic tile, Saltillo and natural stone, over hard to- bond – to surfaces. Meets ANSI A118.4 mixed with water.
|
- For any porcelain tile installation project with cement based substrate on wall and floor.
- For any ceramic tile floor project that would be exposed to intense traffic.
- Use it with marble and granite on interior and exterior floors and walls.
- For installations over cement backer boards, gypsum wallboard (dry areas), existing ceramic tile, vinyl tile, exterior grade plywood (interior residential dry areas), counter tops, concrete slabs and mortar beds.
- Product size: 22 Pounds bag.
| Feature |
Description |
Standar |
| Pot life |
Approximately 2 hours |
|
| Open time at 70 °F to 77 ° |
> 50 minutes |
ANSI A 118.4 |
| Room temperature adjustability |
30 minutes |
ANSI A 118.4 |
| Initial Set |
> 6 hours |
ANSI A 118.4 |
| Final set |
> 9 hours <15 hours |
ANSI A 118.4 |
| Shear Strenght |
7 days |
ANSI A 118.4 |
| Glazed wall tile |
> 20.9 kg/ cm2 (300 psi) |
|
| Impervious ceramic mosaic tile |
> 14.0 kg/ cm2 (200 psi) |
|
| Shear Strenght |
> 17.5 kg/cm (wood failure) |
|
| Shelf life |
18 months in a dry, well-ventilated area |
|
22 pound bag
| 2.6—3.0 m² |
using a 1/4” x 1/7” x 1/4” square-notched trowel when installing tiles measuring up to 20 × 20 cm (8” × 8”) |
| 2.3—2.8 m² |
using a 1/4” x 3/8” x 1/4” square-notched trowel when installing tiles measuring up to 33 × 33 cm (12” × 12”) |
| 2.0—2.5 m² |
meters using a 1/2” x 1/2” x 1/2” square- or curved-notch trowel when installing tiles measuring up to 50 × 50 cm (20” × 20”) |
NOTE: These coverage are approximate and for estimating purposes only. Coverage may vary depending on the type of trowel used, the condition of the substrate and installation practices.
- Do not use to install Rosso Levanto or Negro Marquina marbles, green marble or green marble agglomerates. Instead, use CEMIX Boquillex Époxico.
- Do not apply over particleboard panels, agglomerates, plaster patch materials, metals, plastic or any material that is unstable or too flexible.
- Wear gloves and safety glasses. This material is alkaline when mixed with water. Avoid contact with eyes and skin.
The material adheres to skin and eyes upon drying.
- Do not apply if the temperature in the work area is below 50 °F or on hot surfaces.
|
|
|
 |