|
 |
|
|
CEMIX Boquillex Plus is formulated with Portland cement, special aggregates, chemical additives and pigments, to produce dense joints for most tile installation projects.
Meets ANSI A118.6 specifications mixed with water.
|
- For grout any kind of ceramic tile with grout joints from 1/8” to 5/8” (3 – 15mm) wide.
- Suitable for interior or exterior installations on floors, walls, countertops, showers and bathroom areas.
- Resistant to stains, powdering, cracking and wear.
- Low absorption formula for easy maintenance and lasting colors.
- Easy to spread and clean up formula for a better smooth finish.
- 25 colors for an easy match or combination with tile colors or patterns.
- Product size: 22 Pounds per bag.
| Feature |
Description |
Standard |
| Pot life at 70 °F |
Approximately 1 hour |
|
| Initial set |
1–3 hours |
|
| Final set |
3–5 hours |
|
| Initial curing |
24 hours |
|
| Final curing |
14 days |
|
| Packaging |
22 lbs bag (10 kg) |
|
| Shelf life |
6 months in dry, well-ventilated areas |
|
| Water absorption |
Less than 7% |
ANSI A 118.6 |
| Compressive strength |
Exceeds 246kg/cm2 |
ANSI A 118.6 |
| Flexure strength |
Exceeds 24.6kg/cm2 |
ANSI A 118.6 |
10kg sac
Approximate coverage in square meters per pound of CEMIX Boquillex Plus
| Tile Dimension |
Width of the joint, 1/8" |
Width of the joint, 1/4" |
Width of the joint, 3/8" |
| 4” × 8” × 3/8 “ |
6.14 |
3.17 |
2.18 |
| 6” × 6” × 3/8 “ |
6.88 |
3.51 |
2.38 |
| 8” × 8” × 3/8 |
9.11 |
4.65 |
3.12 |
| 12” × 12” × 3/8 “ |
13.61 |
6.88 |
4.65 |
NOTE: These coverage are approximate and for estimating purposes only.
Acero |
Adobe |
Almendra |
Arena |
Azul |
Beige |
Blanco |
Blush |
Café claro |
Carne |
Champagne |
Chocolate |
Coral |
Gris perla |
Mandarina |
Marfil |
Moka |
Negro |
Pacífico |
Plata |
Platinum |
Rojo |
Rojo saltillo |
Rosa |
Verde esmeralda |
 |
- For installations that require high resistance to chemicals, use CEMIX Boquillex Epóxico (see information sheet for more details).
- Do not install when temperatures are lower than 50°F (10°F)
- Use of muriatic acid for cleaning the grout is not recommended.
Caution: Sand particles in the product could scratch polished pieces or delicate enamels. Test in a hidden or inconspicuous area before starting.
|
|
|
 |