|
 |
|
|
CEMIX Microesfera Antiderrapante is an extremely fine polymer that has the unique characteristic of perfectly mixing with the CEMIX Lacquer Sealant. When applied, there is no visible difference to the naked eye, but there is a difference to the touch. Thus making the surface slip-proof and fall-proof.
|
Mixes perfectly with the CEMIX Barniz Sellador to make the surface where applied slip proof. Can be applied to vertical and horizontal surfaces.
-
Add the 2.2 lb (1 K) of CEMIX Microesfera Antiderrapanteto a 5 Gal (19 L) can of CEMIX Lacquer Sealant.
- Stir the mixture until the Sealant and Anti-Slip treatment are as uniformly mixed as possible.
- Apply the Lacquer Sealant according to its instructions.
- It is essential to constantly stir the mixture in the bucket both before and during the application since the microsphere tends to stay on the surface.
- Although the Microsphere has a very fine texture, it is possible that a sprayer will not be able to be used for the application due to the possibility of the product clogging the sprayer.
Box 1kg
-
2.2 lb (1 K) of CEMIX Microesfera Antiderrapanteis sufficient for a 5 Gal (19 L) Lacquer Bucket. This has an approximate coverage of 861 to 1076 sq. ft. (80m2 to 100m2), depending on the surface porosity.
-
20 grams of CEMIX Microesfera Antiderrapanteis sufficient for a 1 Gal bucket. This has an approximate coverage of 194 to 215 sq. ft. (18m2 to 20m2) depending on the surface porosity.
- Keep out of reach of children.
- Use safety glasses to apply the mixture after the lacquer has been added.
- In case of eye or skin contact, immediately wash with water.
- In case of ingestion, seek medical attention.
|
|
|
 |