|
 |
|
|
CEMIX Pegamix Constructor is an adhesive mortar for high- and medium-absorption ceramic tiles. It is a general-use adhesive that is ideal for installation in residential areas in all types of home. Complies with ANSI A118.1 when mixed with water.
|
-
For installing high- and medium-absorption ceramic tiles such as glazed tiles, floor tiles and clay tiles
-
For installing tiles on walls and floors in interiors or exteriors not exposed to sudden temperature changes or excessive humidity
-
Ideal for housing projects that require fast, low-cost construction and a guaranteed product
| Property |
Description |
Standard |
| Pot life |
Approximately 2 hours |
|
| Open time at 22 °C |
> 50 minutes |
ANSI A 118.1 |
| Time for adjustments |
30 minutes |
|
| Initial set at 22 °C |
48 hours |
|
| Final set at 22 °C |
28 days |
|
| Cut resistance (7 days) |
|
ASTM A 118.4 |
| Non-glazed tile |
> 17.5 kg/cm² |
|
| Lineal contraction |
> 0.5% |
|
| Shelf life |
12 months in a dry, well-ventilated area |
|
20 kg bag
| 5.0—6.2 m² |
using a 6mm × 6mm × 6mm square-notched trowel. |
| 4.0—5.0 m² |
using a 6mm x 10mm x 6mm square-notched trowel. |
Note: These yields are approximate and for estimating purposes only. Yields may vary depending on the type of trowel used, the condition of the substrate and installation practices.
- Do not use to install Rosso Levanto or Negro Marquina marbles, green marble or green marble agglomerates. Instead, use CEMIX Boquillex Époxico.
- We recommend CEMIX Pegapiso y Mármol for installing light, translucent marble or translucent marble agglomerates.
- Do not apply over wood, wood agglomerates, plaster, asbestos panels, asphalt, metal or similar materials that are unstable.
- Do not use when temperatures are lower than 6 °C or on hot surfaces.
- Do not use this product to install porcellanato or tiles with zero humidity absorption.
- Do not use this product to install flooring over flooring. Use CEMIX AMU or CEMIX PSP Porcelánico as appropriate.
|
|
|
 |