|
 |
|
|
CEMIX Pegaveneciano is an easy to use powder resin and Portland cement-based mortar adhesive. Just add water and mix. CEMIX Pegaveneciano provides superior bonding to concrete surfaces. Because of its high resin and polymer content, CEMIX Pegaveneciano is the ideal product for installation in areas that are constantly in contact or are submerged in water.
CEMIX Pegaveneciano meets and exceeds ANSI A 118.4.
|
- A specially designed formula for installing Venetian glass mosaic tiles or any type of tile that is designed to be installed in pools or in areas that are continuously in contact with water.
- Available in white or blue. Can be used as an adhesive and grout for Venetian glass mosaic tiles.
- No special additives are needed. Only mix the product with clean water to prepare the adhesive.
- Can be used to adhere decorative tiles to facades, exterior and interior walls.
| Feature |
Description |
Standar |
| Pot life |
Approximately 2 hours |
|
| Open time at 70 °C |
> 50 minutes |
ANSI A 118.4 |
| Working time |
30 minutes |
|
| Initial cure at 70°F |
24 hours |
|
| Full cure at 70°F |
28 days |
|
| 7 Day Shear strength |
|
ASTM A 118.4 |
| Non-vitreous tile |
>20.9 kg / cm2 |
|
| Vitreous tile |
>14.0 kg / cm2 |
|
| Shear strength to wood |
>17.5 kg / cm2 (wood fail test) |
|
| Product storage life |
12 months in dry, well-ventilated areas. |
|
22 lb. (10 kg) bag
| 2.5 – 3.0 m2 |
using a 6 mm x 6 mm x 6 mm square notched trowel when installing up to 8” x 8” (20 x 20 cm) tiles. |
| 2.0 – 2.5 m2 |
using a 6 mm x 9 mm x 6 mm square notched trowel when installing up to 12” x 12” (33 x 33 cm) tiles. |
| 1.5 – 2.0 m2 |
using a 9 mm x 12 mm x 12 mm square notched trowel when installing up to 20” x 20” (50 x 50 cm) tiles |
Note: These coverage ranges are approximate and for estimation purposes only. The coverage ranges may vary according to the type of trowel used, substrate conditions, and method of installation.
- Do not use for installing marble, Rosso Levanto marble, Negro Marquina marble, or veined granite and its agglomerates. For installation on these product types, use CEMIX Boquillex Epóxico.
- Do not apply to particle board, composite materials, dry wall and plaster sealing compounds, metal, plastic, or to any other unstable or flexible material.
- Use gloves and safety glasses. This material is alkaline when mixed with water. Avoid contact with the eyes and skin. The material will adhere to the skin and eyes when it dries.
- Do not apply if the ambient temperature is less than 50°F (10°C).
|
|
|
 |