|
 |
|
|
CEMIX Porcelanico Gris is Portland cement based adhesive mortar that contains powder resins. Just mix the tile adhesive with water, and it is ready to use. This product is designed to give high adhesion on smooth concrete surfaces and in areas that are exposed to heavy traffic in both interiors and exteriors. Can be used for installing all types of ceramic and natural stone coverings.
CEMIX Porcelanico Gris meets and exceeds the ANSI A 118.4.
|
- Specially designed for porcelain tile installations on walls and in heavy traffic areas.
- For installations on smooth concrete surfaces that are completely cured (28 days), cement-sand mortars, drywall panels, and surfaces covered with a basecoat.
- For all installing all types and grades of ceramic tile - vitreous, semi-vitreous, non-vitreous, and impervious – marble, granite, acid-proof, and clay tiles. For use on floors in interiors and exteriors.
| Property |
Description |
Standard |
| Open time at 72°F (22°C) |
> 50 minutes |
|
| Open time at 100°F (38°C) |
> 20 minutes |
|
| Initial Curing |
4 hours |
|
| Final Curing |
14 hours |
|
| 7 Day Shear strength |
|
ANSI A 118.4 |
| Tile |
> 300 PSI |
|
| > 200 PSI |
|
44 lb (20 k) sack
| .5m2-5 m2 |
using a 6 mm x 9 mm x 6 mm square notched trowel. |
| 3.5m2-4.5 m2 |
6 mm x 12 mm x 6 mm square notched trowel.
|
Note: These coverage ranges are approximate and for estimation purposes only. The coverage ranges may vary according to the type of trowel used, substrate conditions, and method of installation.
- Do not use for installing marble, Rosso Levanto marble, Negro Marquina marble, or veined granite and its agglomerates. For installation of these product types, use CEMIX Boquillex Epóxico .
- Do not apply to particle board, composite materials, dry wall, asbestos cement panels, asphalt, metal, or to any other unstable or flexible material.
- Do not apply product at temperatures below 43°F (6°C) or to hot surfaces.
|
|
|
 |